ConcreteCalc
PRO All 30 Tools
All 30 Tools

Concrete Curb & Gutter Calculator

Calculate the ready-mix concrete volume (cubic yards) and material tonnage required for poured or slipformed concrete curbs, street curb & gutter combinations, parking lot barrier curbs, and mountable roll curbs.

Interactive Curb Calculator

ENGINEERING SCHEMATIC
Extruded Concrete Curb & Gutter Geometry
Volume (V) = Area × Depth 1 Cubic Yard = 27 Cubic Feet
💡
Pro Contractor Recommendation: Combines vertical curb barrier with horizontal water flow pan. Standard profile is 6" curb face with 12"–18" gutter pan.
Curb Profile & Length
%
Total Concrete Volume Required
4.86 cu yds
(131.2 cu ft / 3.72 m³)
Profile Cross-Section
180.0 sq in
End profile geometric area
Estimated Total Weight
9.5 tons
(19,031 lbs)
Linear Run
100 ft
(30.5 m)

Common Concrete Curb Profiles

Curbs serve critical civil functions including stormwater drainage channeling, vehicular parking boundary control, and pavement edge containment:

  • Standard Curb & Gutter: Combines a vertical or battered 6" curb face with a horizontal 18" to 24" gutter pan that channels street runoff directly into storm sewers.
  • Barrier Curb: Heavy-duty 18" high vertical barrier curb designed to prevent vehicular parking encroachment in commercial lots and roadways.
  • Roll / Mountable Curb: Low-profile sloping curb allowing vehicle tires to drive over into residential driveways without jarring wheel impacts.