ConcreteCalc
PRO All 30 Tools
All 30 Tools

Concrete Driveway Calculator

Calculate the exact ready-mix concrete volume (cubic yards), crushed stone subbase tonnage, and saw-cut contraction joint layout for residential concrete driveways. Supports standard car traffic (4" thickness), heavy pickup trucks (5" thickness), and RV/commercial vehicle pads (6" thickness).

Interactive Driveway Calculator

ENGINEERING SCHEMATIC
Residential Concrete Driveway Flatwork
Length (L) Width (W) Thickness (T: 4"–6") Surface Area = L × W
💡
Pro Contractor Recommendation: Pour at 4" minimum for passenger cars, 5"–6" for heavy trucks. Tool control joints every 8–10 feet to manage drying shrinkage cracks.
Quick Presets:
Driveway Dimensions
Vehicle Load & Subbase
%
Total Ready-Mix Concrete Required
10.86 cu yds
(293.3 cu ft / 8.31 m³)
Driveway Surface Area
800 sq ft
(74.3 m²)
Crushed Stone Subbase
15.9 tons
Compacted 4-inch stone base
Control Joints (Crack Control)
5 joints
120 lin ft saw cuts (max 9 ft spacing)
Pre-Mixed Bags (80 lb)
489 bags
For hand-mixing or small repairs
Interactive 2D Blueprint

Rebar Grid & Control Joint Visualizer

Real-time scaled layout calibrated to ACI 318 structural concrete standards.

SCALE: DYNAMIC TO FIT ASPECT: 1:1 COVER: 3.0" PER ACI 318 JOINT DEPTH: T/4 = 1.0"
Slab Perimeter
Rebar Grid
Saw-Cut Control Joint
Tie Intersection
Slab Surface Area
100 sq ft
10.0' × 10.0' × 4"
Rebar Grid Counts
14 total bars
7 Long. • 7 Trans.
Total Rebar Linear Footage
146 linear ft
~98 lbs of #4 rebar (+10% lap)
Crack Control Joints
0 cuts needed
Max 10.0' spacing • 1.0" deep
Site Prep & Subgrade

Ground Excavation & Gravel Subbase

Concrete flatwork requires excavating native soil to accommodate both the compacted gravel base and slab thickness.

Concrete Slab Layer 4.0" Thickness
Compacted Crushed Stone Subbase 4.0" Base Depth
Geotextile Separation Fabric Underlayment
Undisturbed Native Soil Subgrade Tamped & Level
TOTAL DIG DEPTH
8.0"
(4" slab + 4" gravel)
Soil to Excavate & Haul
2.96 cu yds
~3.7 tons loose dirt • 1 dump truck load
Compacted Crushed Stone Base
2.1 tons
~1.5 cu yds (+15% mechanical compaction)
Geotextile Fabric Needed
110 sq ft
Prevents gravel sinking into native clay/subgrade
Ready-Mix Dispatch Helper

Call-a-Batch-Plant Order Cheat Sheet

Concrete dispatchers move fast. Have these exact technical answers ready when placing your ready-mix delivery call.

Copied to clipboard!
1. Volume to Request Rounded to 0.25 yd
1.50 cu yds

Includes +10% waste buffer. Plants meter in 1/4-yard increments.

Under 4.0 cu yds usually incurs a ~$75–$120 short-load fee.
2. Mix Design & Strength Structural Grade
4000 PSI

Air-entrained exterior flatwork mix (freeze-thaw & vehicle rated).

3. Slump & Aggregate Chute Pour
4" Slump • 3/4" Stone

Standard workability for direct chute pours. If using a line pump, specify 3/8" pea gravel mix.

4. Estimated Unload Time No Standby Fee
~30 Mins

Suppliers typically include 5–7 mins/yard free unloading. Additional truck standby costs ~$2.50–$3.50/minute.

Before the Truck Arrives — Site Readiness Checklist:
✓ 10' Clearance: Ensure 10-foot wide driveway and 14-foot overhead branch/wire clearance.
✓ Truck Weight: Fully loaded mixer weighs 60,000+ lbs. Never drive over septic tanks or soft ground.
✓ Washout Station: Prepare a designated dirt hole or tarped bin for driver chute washout.
✓ Crew Ready: Have wheelbarrows, screeds, bull floats, and crew on site 15 mins before scheduled pour.
Contractor Bid & Material Takeoff Sheet

Export or print an executive 1-page PDF job estimate with material checklist.

CONCRETECALCPRO STRUCTURAL ESTIMATION & JOB TAKEOFF
Document: Project Material Takeoff
Date:
Type: Concrete Driveway Project

1. Project Dimensions & Area Specifications

Length Width Thickness Surface Area

2. Concrete Volume & Batch Order Requirements

Net Calculated Volume Recommended Order (+10% Waste) 80-lb Pre-Mix Bags 60-lb Pre-Mix Bags

3. Steel Reinforcement & Crack-Control Joint Schedule

Rebar Specification Grid Spacing Bar Count Linear Footage Total Steel Weight Control Saw Cuts

4. Jobsite Material Checklist

Ready-Mix Concrete Truck or Pre-mixed Bags
Deformed Steel Rebar / Welded Wire Mesh
Concrete Dobie Chairs (to suspend rebar at 2" depth)
16-Gauge Tie Wire & Rebar Safety Caps
Formwork Lumber (2×4 or 2×6) & Wooden/Steel Stakes
6-mil or 10-mil Polyethylene Vapor Barrier
1/2" Expansion Joint Filler Strips (at walls/slabs)
Compacted Crushed Stone Subbase (2.1 tons • 4" depth)
Soil Excavation & Hauling (3.0 cu yds loose dirt)
Project / Jobsite Address:
Contractor / Estimator Name:
Client Approval Signature:
Target Pour Date:

Engineering Disclaimer: This takeoff sheet provides estimation guidelines in accordance with ACI 318 & 360R standard residential flatwork practices. Subgrade deflection, form expansion, ground slope, and contractor placing practices will affect final concrete volume. Always confirm structural requirements with local building authorities and structural plans prior to placing orders.

ConcreteCalc Pro • https://concretecalcus.com Page 1 of 1

Recommended Driveway Thickness by Vehicle Weight

Pouring a driveway too thin is the primary reason for premature alligator cracking and wheel-rut failures:

  • 4 Inches (Standard Passenger Cars): Sufficient for standard sedans, crossovers, and residential traffic on well-compacted subgrade.
  • 5 Inches (Full-Size Pickups & SUVs): Highly recommended for heavy half-ton or three-quarter-ton pickups, delivery vans, and moving trucks.
  • 6 Inches (RVs, Campers & Heavy Equipment): Mandatory for motorhome parking pads, boat trailers, dump trucks, or poor native clay soils.

Standard Driveway Dimensions Reference

Driveway Configuration Typical Width Typical Length Yardage @ 4" (10% waste) Yardage @ 5" (10% waste)
1-Car Standard10 – 12 ft20 – 30 ft3.3 – 4.9 cu yds4.1 – 6.1 cu yds
2-Car Standard20 – 24 ft30 – 40 ft8.1 – 13.0 cu yds10.2 – 16.3 cu yds
3-Car Wide30 – 36 ft30 – 40 ft12.2 – 19.5 cu yds15.3 – 24.4 cu yds