Concrete Cost in Ohio: Ready-Mix Prices & Labor Rates
Calculate Your Project Cost in Ohio
This calculator is pre-loaded with average Ohio ready-mix ($142/yd) and finishing labor ($5.50/sq ft) rates. Adjust the yardage or dimensions to fit your job:
Typical Concrete Project Costs in Ohio
The table below provides realistic cost estimates for common residential installations in Ohio, factoring in standard Ohio ready-mix, gravel subbase, rebar reinforcement, and contractor labor:
| Project Type | Dimensions | Concrete Volume | Material Budget | Labor Budget | Total Estimated Cost | Cost / Sq Ft |
|---|---|---|---|---|---|---|
| 10×10 Patio Slab (4") | 10 ft × 10 ft × 4 in | 1.5 cu yds | $300 | $550 | $850 | $8.50 / sq ft |
| 20×20 Garage Floor (4") | 20 ft × 20 ft × 4 in | 5.5 cu yds | $1,080 | $2,200 | $3,280 | $8.20 / sq ft |
| 24×30 Driveway (5") | 24 ft × 30 ft × 5 in | 12 cu yds | $2,350 | $3,960 | $6,310 | $8.76 / sq ft |
Ohio Regional Construction & Engineering Guide
Regional Market & Price Drivers
Ohio offers competitive concrete pricing compared to national averages, with ready-mix averaging $142 per cubic yard across Columbus, Cleveland, Cincinnati, and Dayton. Total installed costs for residential flatwork typically range from $6.00 to $9.50 per square foot, providing an economical balance of material availability and skilled finisher labor.
Climate, Freeze-Thaw & Mix Design
Ohio experiences frequent freeze-thaw cycles throughout November to March. Exterior driveways, patios, and sidewalks require a 4,000 PSI mix with 5.5% to 7% air entrainment. Control joints should be saw-cut or grooved at maximum 10-foot intervals (for 4" slabs) within 12 to 24 hours of placement to prevent random shrinkage cracking.
Subgrade Soil & Subbase Prep
Glacial till and heavy clay subgrades dominate much of Ohio, retaining high moisture levels. A 4- to 6-inch layer of compacted #411 or #304 crushed limestone aggregate base is standard practice. Installing perforated drain tile along driveway edges is strongly recommended in clay-heavy zones to channel water away from the subbase.
How to Order Ready-Mix Concrete in Ohio
- Calculate Volume with a Waste Buffer: Always add 10% extra concrete to account for uneven subgrade and form spreading. Batch plants in Ohio meter deliveries in 0.25 cubic yard increments.
- Specify Mix Strength (4000 PSI): When calling your local batch plant, specify 4000 PSI for exterior flatwork with air entrainment.
- Confirm Site Access: Ensure 10-foot overhead wire and tree clearance. A loaded ready-mix truck weighs up to 60,000–70,000 lbs.
- Avoid Standby Demurrage Fees: Ohio batch plants typically allow 5 to 7 minutes per cubic yard of free discharge time. Prepare your crew and wheelbarrows before the truck arrives.
Compare Concrete Prices in Other States
Explore regional concrete pricing and installation guidelines in adjacent and high-demand states: